Hot Water Pressure Washing
Cleaning with dry ice. A system that uses small rice size pellets of dry ice shooting them out of a jet nozzle with compressed air. It works somewhat like sandblasting or high-pressure water or steam blasting, with superior results. The frigid temperature of the dry ice -109.3°F or -78.5°C "blasting" against the material to be removed, causes it to shrink and lose adhesion from its sub surface. Additionally when some of of dry ice penetrates through the material to be removed, it comes in contact with the underlying surface. The warmer sub surface causes the dry ice to convert back into carbon dioxide gas. The gas has 800 times greater volume and expands behind the material speeding up its removal. Paint, oil, grease, asphalt, tar, decals, soot, dirt, ink, resins, and adhesives are some of the materials removed by this procedure. Only the removed material must be disposed of, as the dry ice sublimes into the atmosphere.
Lumley’s Duct Cleaners grease duct cleaning techniques uses a 4000 psi 180 ̊ degree Fahrenheit pressure wash system with a specific degreasing solution to breakdown and safely dissolve galley grease. We set up containment systems that drain the dissolved grease and water intothe galley scuppers. Our Degrease solution is environmentally safe and Cruise Line
A cleaning method that uses a Foam chemicals that is applied to break down the grease, oil, and sludge. The Foaming sysem generates a very thick foam which adheres to the surface to be cleaned, remaining in contact for fifteen minutes and then rinsed with hot water. Foam cleaning is an innovative and biodegradable method of cleaning galley duct systems.
A Cleaning process used to remove accumulated buildup consisting of outdoor environmental matter, decomposing HVAC components, biological entities and growth. The professional cleaning processes begin at the HVAC distribution plenum and continue thru the supply ductwork and finishes at the cabin terminal device. All internal surfaces of these areas are mechanical scrubbed, abraded or hand contact cleaned. Using the highest industry standards and methods recommended. We use mobile negative air collection units outfitted with HEPA filters to remove and collect the debris before it enters the work and public spaces. After cleaning is completed the system is purged to ensure that small amounts of lodged debris are removed and caught in the collection
mobile negative air collection
Choose the type of service you need.
Lumley's offers a wide variety of services to get the job done like you want it.